中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 12085.22-2022 光学和光子学 环境试验方法 第22部分: 低温、高温或温度变化与碰撞或随机振动综合试验(中英文版) Optics and photonics - Environmental test methods - Part 22: Combined test of low temperature, high temperature or temperature change with impact or random vibration |
|||
GB/T 20081.3-2021 气动 减压阀和过滤减压阀 第3部分:测试减压阀流量特性的可选方法(中英文版) Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
|||
GB/T 8243.12-2021 内燃机全流式机油滤清器试验方法 第12部分:颗粒计数法滤清效率和容灰量(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity |
|||
GB/T 39748.8-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分:称重法测定流量(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate |
|||
GB/T 38796-2020 汽车爆胎应急安全装置性能要求和试验方法(中英文版) Performance requirements and test methods of automobile blow-out emergency safety device |
|||
GB/T 8243.14-2020 内燃机全流式机油滤清器试验方法 第14部分:复合材料滤清器的冷起动模拟和液压脉冲耐久试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 14:Cold start simulation and hydraulic pulse durability for composite filter housings |
|||
SJ/T 11769-2020 电子元器件低频噪声参数测试方法 通用要求(中英文版) Test methods for low frequency noise parameters of electronic components - General requirements |
|||
GB/T 24981.1-2020 稀土长余辉荧光粉试验方法 第1部分:发射主峰和色品坐标的测定(中英文版) Test methods of rare earth long afterglow phosphors—Part 1: Determination of emission dominantpeak and chromaticity coordinates |
|||
GB/T 24981.2-2020 稀土长余辉荧光粉试验方法 第2部分:余辉亮度的测定(中英文版) Test methods of rare earth long afterglow phosphors—Part 2: Determination of afterglow brightness |
|||
GB/T 8243.15-2018 内燃机全流式机油滤清器试验方法 第15部分:复合材料滤清器的振动疲劳试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings |
|||
GB/T 8243.5-2018 内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 5: Test for cold start simulation and hydraulic pulse durability |
|||
GB/T 34862-2017 确定三相低压笼型感应电动机等值电路参数的试验方法(中英文版) Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors |
|||
GB/T 8243.6-2017 内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test |
|||
GB/T 8243.7-2017 内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 7:Vibration fatigue test |
|||
GB/T 14513.1-2017 气动 使用可压缩流体元件的流量特性测定 第1部分:稳态流动的一般规则和试验方法(中英文版) Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow |
|||
GB/T 35382-2017 塑料中空成型机能耗检测方法(中英文版) Test methods for energy consumption of blow moulding machines for plastics |
|||
GB/T 32361-2015 分离膜孔径测试方法 泡点和平均流量法(中英文版) Test methods for pore size properties of membrane filters—Bubble point and mean flow pore test |
|||
GB/T 8243.13-2015 内燃机全流式机油滤清器试验方法 第13部分:复合材料滤清器的静压耐破度试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings |
|||
JC/T 2284-2014 空心玻璃微珠抗等静压强度(水压法)、吸油率及漂浮率的测定方法(中英文版) Test methods of isostatic compression strength (hydrostatic collapse strength), oil absorption and floatation ratio for hollow glass microspheres |
|||
GB/T 30844.2-2014 1 kV及以下通用变频调速设备 第2部分:试验方法(中英文版) Variable-frequency drive of 1kV and below—Part 2:Test methods |
找到:62條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 |